HTML 5 Deployment Test

Please consult our Product Information "Tilt and turn fittings for windows and doors" for details of the product and product liability.

For the hardware described in these Assembly Instructions the details given for the profile sections and on the diagram for determination of the permissible vent size, must be complied with. Please consult your Kawneer representative if the dimensions of the windows and door height windows are different.

It is possible for bearing components to break due to excessive strain. This could cause the window to drop out of the frame and potentially cause serious injuries. If due to special circumstances (use in school, nurseries etc.) excessive strain on bearing components can be expected, fatigue of these components must be prevented by suitable means, e.g. by using an ALU sash brake with damping, which restricts the opening angle of the window or by use of a turning lock.

The hardware components described in these Assembly Instruction are made of non- rusting material or have been galvanised to DIN 50 961. They must not be installed for use in aggressive, corrosion promoting air.

We will not accept liability in respect of any damages or defects arising where the hardware assembly incorporates products not made by Kawneer.

Please follow the standard techniques for packing and wedge the sealed glazing units within the vent/frame.

Do not use any acid hardening sealants, as these can lead to corrosion of the hardware components.

Keep all grooves and rebates free from dirt and debris- especially residues of cement or plaster. Avoid the direct effect of moisture on the hardware and contact of the hardware with cleaning agents.

Affix a clearly visible copy of the user information onto the fitted window or door element.

Hand the user the following literature:

- Maintenance Instructions, Item No:

- Operating Instructions, Item No: 05766(DK) / 05768 (TBT)